| Using the Flexible Fast Clock (FFC): |
 |
Your trains will appear to take minutes instead of seconds to travel only a few feet!
|
|
|
You can enhance your operations by adhering to a timetable!
|
|
|
You can run through an entire day of railroad operations in just a matter of hours!
|
|
|
You can control building lights or other accessories using the "Event Control" outputs
|
|
|
| Flexible Fast Clock
Master Controller
features: |
|
|
Fifteen Speedup times ranging from 1:1 (real time) to 15:1 that you can change at any time using switches on the
circuit board or wired externally!
|
|
|
Support for up to 9 Fast Clock Display Modules (FDMs)
|
|
|
FDMs can be up to 1000 ft. apart!
|
|
|
User programmable "start" time
|
|
|
Four User-programmable "Event Control" outputs; each output can be individually used in one of two modes:
- Turn lights/accessories on and off using a start and end time
- Trigger or momentarily (2 sec.) activate a device such as a buzzer or annunciator at the programmed time
|
|
|
1 year warranty |
|
|
$69.95 MSRP |
|
|
| FDM features: |
|
|
Large (0.8"), easy-to-read red LED digits |
|
|
12 or 24 hour operation with AM/PM indicator (in 12 hour mode)
|
|
|
Flashing colon
capability |
|
|
Colored display filter to enhance visibility |
|
|
Mounting hardware |
|
|
10 ft. cable with
modular plugs for connecting
to the master controller or
other FDMs; longer lengths available at extra cost ($0.20/ft) |
|
|
Installation Guide |
|
|
$54.95 MSRP |
|
|
| Technical specifications: |
|
|
Display area dimensions: 1.25" h x 4.1" w |
|
|
FDM board dimensions: 2.6"
h x 5.2" w |
|
|
Master Controller board dimensions: 3.4" x 3.6" |
|
|
Input Voltage: 6.3V - 18V AC or DC
|
|
|
Power Consumption: 410 mA @ 12VAC (with 1 FDM)
 |
Our #WT1A, sold separately, is rated at 12V, 1 amp (output)
|
|
|
|
Event Control Output Drive: 150 mA |
|
